Inga produkter tillagda!

Lägg en produkt i varukorgen så ser det lite roligare ut här ;)

Varukorg 0 kr

Begagnat Parasound JC2 BP

Begagnat Parasound JC2 BP

25 000 kr

Finns för visning / demo (2-4 arbetsdagar)
Fri frakt!

Fler bilder

Kontakta oss för frågor eller köp!

Ditt namn:
Din e-mail:
Ditt telefonnummer:
Meddelande:

Välljudande försteg från parasound.

Inkl org emb.

OBS Säljes för kunds räkning!

Vänligen kontakta Anders

anders@lefflers.se

Features

Home theater bypass enables seamless blending into a digital surround system
Home theater bypass functions with both unbalanced & balanced inputs and outputs
Home theater bypass function can be assigned to any input
Bypass remains selected after unit has been turned off
Improved remote control is included with the bypass assignment keys
Specifications and sonic performance are 100% the same as the original JC 2
6 pairs unbalanced RCA line-level audio input jacks
2 input pairs can be switched to XLR balanced connectors
Independent balanced/unbalanced select for the L & R channel
Each channel’s input is switched by its own gold-on-silver contact relay
4 output jack pairs with specialized functions:
1 Main output jack pair is balanced XLR, polarity is switched by remote
1 Main output jack pair is unbalanced RCA, polarity is switched by remote
1 output jack pair is unbalanced RCA, inverted polarity only
1 output pair is unbalanced RCA, normal polarity, fixed level for recorders
Dual-mono left & right channel circuit boards minimize crosstalk
Hand-matched complementary FETs
Direct DC servo-coupled, no capacitors in the signal path
Premium 4-gang motor-driven analog master volume control
Separate TKD brand analog gain controls for L & R channel
3/8″ thick aluminum shielding around audio boards
Shielding prevents noise from power supplies & control circuits
Separate output jacks for simultaneous normal & non-inverting polarity
Aluminum chassis rear panel
Remote control polarity switching uses gold-on-silver contact relays
Vampire brand 24k gold-plated RCA jacks
Neutrik brand premium XLR connectors
Canare brand internal wiring
High capacity R-core audio power transformer & inductor
Hyper-fast soft recovery audio bridge rectifiers diodes
Independent power supply for controller, relay coils, triggers, LEDs
Remote control handset controls all functions
Discrete IR codes for remote control
Four 12v trigger output jacks for power amp auto turn-on:
Two 12v trigger jacks are switched by the remote handset
Two 12v trigger jacks are live when the JC 2 is turned on
Two-way RS-232 serial port connection
Line level inputs only; no inputs for phono
Audio mute is switched by independent L & R relays
Rear panel IR repeater input & loop out jacks
Premium detachable heavy gauge IEC AC cord
2 6’ (2m) trigger wires included
Remote handset also controls Parasound Halo T 3 Tuner
3u Chassis, rack mountable with HRA3 (sold separately)
MER INFORMATION HÄR
Specifications
Frequency Response5 Hz – 100 kHz, +0/-3 dB
DistortionTHD: < 0.003% at 100 HzTHD: < 0.005% at 20 kHzIM: 116 dB, input shorted, IHF A-weighted> 104 dB, input shorted, unweighted
Crosstalk> 100 dB at 10 kHz> 90 dB at 20 kHz
Gain14 dB, maximum
L, R Gain Control Range– 10 dB
Input ImpedanceUnbalanced: 30k ohmsBalanced: 30k ohms per leg
Output ImpedanceUnbalanced: < 60 ohmsBalanced: < 60 ohms per leg
Input Sensitivity200 mV for 1 V outputTotal Gain: 14 dBMaximum Output: 8 V
XLR Pin Identification1 = Ground (Shield)2 = Positive3 = Negative (Return)
AC Power Requirement110 – 120 V or 220-240 V, 50 – 60 Hzs(Set AC Voltage switch on rear panel)25 watt standby; 30 watts when turned on
DimensionsWidth: 17 1/4″ (437 mm)Depth: 16″ (406 mm)Height, with feet: 5 7/8″ (150 mm)Height, without feet: 5 1/4″ (133 mm)
WeightNet: 24 lbs. (11 kg)Shipping: 36 lbs. (16.4 kg)

https://www.youtube.com/watch?v=HG413H4aon8
Modell
Parasound JC2 BP
Varumärke