Varukorg 0 kr
Kontakta oss för frågor eller köp!
OBS Säljes för kunds räkning!
Vänligen kontakta Anders
The Amadeus GTA is constructed with a two pieced damped aluminium/acrylic sandwich base of exactly the same dimensions as the Amadeus with a substantial weight of 16.5kg. The Amadeus GTA MKII features the LTD tonearm in the new Symmetrex configuration.
Aluminium/acrylic sandwich base
“Zero Clearance” platter bearing
Servo controlled motor with vibration controlled mounting
0.004” polyester thread belt
Fully damped LTD Symmetrex tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping
Easy azimuth adjustment
Fixed headshell with no fussy setup
Isolation feet included
Dual layer aluminium/acrylic sandwich construction plinth
Pickup Dynavector XX2 mkII
The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.
The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.
The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.
For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.
Type Low output moving coil cartridge with Alnico magnet and Flux damper
Output Voltage 0.28mV (at 1KHz, 5cm/sec.)
Channel Separation 30 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 - 20,000Hz (± 1dB)
Compliance 10 mm/N
Tracking force 1.8 - 2.2 g
Impedance 6 ohms
Recommended load impedance > 30 ohms
Cantilever 6mm length 0.3 mm dia. solid boron
Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron
Weight 8.9 g