Dynaudio Focus 10

Focus 10
2x RCA
1x Toslink, 1x RCA
1x Sub RCA, 1x Trigger
1x RCA (to Client)         Digital Out
1x RCA (from Primary)   Digital In
WiSA (Up to 24-bit/96kHz)
RCA (24-bit/192kHz)
Wi-Fi, Ethernet

Tinkered and tailored

That’s because Focus is a high-end active system. Each individual drive-unit has its own custom-tuned amplifier (the same type we use in our professional studio speakers). Each amplifier is matched in performance for its woofer, midrange driver or tweeter. It means we can dial-in every speaker to a stunning degree of accuracy, so you can dial-in your ears and experience the kind of detail that grabs you by the lapels and makes you drop everything else.

Thanks to sophisticated DSP (digital signal processing), Focus speakers can optimise their performance for their position in your room. Just tell them where they are – near to a wall, in a corner or in free space – and they’ll do the rest. And if you want to dig deeper down the calibration rabbit-hole, there’s optional Dirac Live optimisation for performance tailored to your specific room.

They’ll even auto-compensate their EQ when you apply or remove their magnetic grilles. Our designers actually wrote some special code to make the new signature ‘Y’ shaped LED flash blue to let you know it’s recalibrating. (Leave our team alone for a while and they’re sure to improve on perfection.)

And – of course – all Focus speakers use Dynaudio’s legendary soft-dome tweeters, proprietary MSP (Magnesium Silicate Polymer) woofers, and beautifully finished furniture-grade wooden cabinets. They’ve been designed, tuned, measured, tested and constructed with all the care and fanatical attention to detail we pour into all our high-end speakers. Just as you’d expect.

Everything is set up from the simple, intuitive Dynaudio app. Configure your speakers, connect them to your network, assign presets and more – all from one place. Then you can use either the stylish Bluetooth remote control or your mobile device to control your music.

These speakers are digital – and digital means they can be updated. We’ll send out periodic firmware updates, which download automatically to your speaker (you can choose whether or not you install them, of course). That means we can enable new features, improve tunings as we refine them and much more. You can upgrade your system without even touching it.

We know many of you want to experience true high-end sound without stacks of powered rectangles between your hi-fi speakers. Now you can. Focus is authentic, premium Danish hi-fi without the fuss. It's your complete wireless sound system.

Analog inputs (Primary)2x RCA
Digital inputs (Primary)1x Toslink, 1x RCA
Analog outputs (Primary)1x Sub RCA, 1x Trigger
Digital outputs (Primary)1x RCA (to Client)
Digital inputs (Client)1x RCA (from Primary)
Wireless inter-speaker connectionWiSA (Up to 24-bit/96kHz)
Wired inter-speaker connectionRCA (24-bit/192kHz)
NetworkWi-Fi, Ethernet
Bluetooth4.2
StreamingRoon, Airplay2, Chromecast, Tidal Connect, Spotify Connect, Qplay, UPnP
Amplifier Power Woofer (W)280
Amplifier Power Tweeter (W)110
AC Power Input100-240V 50/60Hz
Max Stand-by Power Consumption (W)2
Max Power Consumption (W)280
Lower Cutoff (Hz @85 dB +/- 3 dB)43
Upper Cutoff (kHz @ 85dB +/- 3 dB)22
Lower Cutoff (dynamic) (Hz @ -6 dB)22
Upper Cutoff (dynamic) (kHz @ -6 dB)36
Box PrincipleSealed
Crossover2-way DSP-based
Crossover Frequency (Hz)2200 Hz
Tweeter28mm Cerotar soft dome with Hexis
Midrange/Woofer14 cm MSP
Weight kg7.5
Width mm180
Height mm315
Depth mm261