Inga produkter tillagda!

Lägg en produkt i varukorgen så ser det lite roligare ut här ;)

Varukorg 0 kr

Q Acoustics Concept 50 Concept 50 Piano Svart

Q Acoustics Concept 50

24 990 kr

24 990 kr Finns för visning / demo
24 990 kr Beställningsvara
24 990 kr Beställningsvara
Finns för visning / demo (2-4 arbetsdagar)
Fri frakt!

Fler bilder

Q Acoustics Concept 50 hos Lefflers Ljud & Bildupplevelser i Norrköping

Lämpad för större utrymmen erbjuder Concept 50 en verkligt elegant ljudprestanda för hemmet utan den exklusiva prislappen. Varje element av akustisk innovation i Concept 50 är inriktat på att utforma det tystaste kabinetten som möjligt. Opåverkad av interna och externa resonanser, dessa högtalare levererar fokuserad stereobildning, exakt ljud och ett utökat holografiskt ljudbild för att efterlikna en liveframträdande i hemmet.

Med en högre känslighet för förbättrad dynamik, återger Concept 50 en ren musikalitet och otroligt realistiska soundstage

Gelcore™ cabinet construction reduces higher frequency cabinet noise.
P2P™ (Point to Point™) internal bracing stiffens the cabinet to minimise lower frequency vibrations.
HPE™ (Helmholtz Pressure Equalizer™) reduces internal pressure and standing waves.
Isolation suspension base eradicates unwanted external and internal vibrations.
The driver assembly is mounted to the front aluminium baffle by pretensioned studs to give the correct acoustic seal, while dampen vibrations and minimise structural coupling of the assembly in main cabinet.
Ground-up mid/bass and tweeter driver design for increased power handling.
High-frequency driver is fully hermetically sealed and mechanically isolated (floating) from the front baffle to protect from internal resonances from the mid/bass driver.
Crossover design is mounted on the isolation base, to minimise any microphonic pick up and away from electro-magnetic fields radiated by the drive units.

Controlled power
Designed as an integral part of the mechanical structure of the cabinet, both the 5-inch mid/bass and 0.9-inch tweeter drivers are new, ground-up designs specifically for the Concept 30, 50 and 90 loudspeakers. The drive units are fixed to a remarkably stiff 3mm aluminium baffle plate before it is fitted to the cabinet - this gives the correct acoustic seal, dampening vibrations and minimising structural coupling.

Elsewhere, the tweeter is hermetically sealed and mechanically isolated (floating) from the baffle, which means lower distortion and a lower crossover point for seamless integration through the crossover region. At 30.5mm, the larger mid/bass driver voice coil increases motor strength resulting in a 50% increase in power handling over a comparable driver with 25.4 mm voice coil.

Lastly, the crossover itself is mounted to the isolation base, keeping it free of sound-effecting vibrations and away from the electro-magnetic influence of the drivers themselves.

HPE™ (Helmholtz Pressure Equalizer™) technology
The very nature of the Concept 50 tower design can introduce undesirable standing waves within the cabinet. By employing an HPE™ (Helmholtz Pressure Equalizer™) tube design, first launched in the Concept 500, pressure is converted to velocity to eliminate these performance-effecting vibrations and to help deliver the ideal frequency response.
Elegant design
Boasting the same sophisticated design lines and stunning, premium high gloss finish of the top-of-the-range 300 and 500 models, the new range retains the signature aluminium front baffle plate that made the original Concept speakers so iconic. The Concept 50 arrives in three striking lacquers: black, silver and white.

Bass unit 2 x 125 mm (5.0 in)
Treble unit 1 x 25 mm (0.9 in)
Frequency response(-6dB) 42 Hz - 30 kHz
Nominal impedance 6 Ω
Minimum impedance 3.6 Ω
Sensitivity (2.83V @ 1kHz) 90.5 dB/w/m
Recommended amplifier power 25-150 W
Crossover frequency 2.1 kHz
Distortion (120Hz - 20kHz, @2.83Vrms) <0.2%

Effective volume 28.8 L
Dimensions (per loudspeaker / HxWxD) Inc spikes and stabiliser: 1025 x 418 x 319 mm (40.4 x 16.5 x 12.6 in), Cabinet width: 180 mm (7.1 in)
Weight (per loudspeaker) 22.9 kg (50.5 lbs)

Concept 50